Description

Omron MC 343F Digital Thermometer is a device that measures the body's temperature. It can be used in the oral cavity, rectal cavity, and under the armpit. The flexible tip and the buzzer sound make it easy for the user to use the device and know the completion of the measurement process. | Uses: The device measures the body temperature and converts the reading into a readable format such as Celsius or Fahrenheit. | Product Specifications and Features: | Measurement range: 32.0C - 42.0C / 89.6F - 107.6F | Fast measurement: 10 seconds for rectal, 20 seconds for oral, and 25 seconds for underarm measurement | Flexible tip: Provides added comfort and safety | Buzzer: Beeps when the measurement is completed | Water-resistant: For easy cleaning and disinfection | Measurement display: in 0.1-degree increment | Measurement unit: C/F selectable | Battery: The battery is replaceable Battery type: One LR41 Alkaline-Manganese Button Battery | Auto shut-off: Yes | Memory function: Recalls last reading | Good to Know: Dual mode reading (F and C ) | Type of Thermometer: Non-mercury-based digital thermometer | Directions for Use: Press the I/O button Apply the thermometer to the measurement site For oral and rectal measurement: When the reading is ready, the device will emit a [beep-beep-beep] sound three times. Remove the thermometer and read the result For underarm, continue holding for 2-5 minutes to complete the measurement Turn off the thermometer and store it in the protective case | Safety Information: Do not bite on the thermometer. Doing so may lead to breakage or injury Do not bite on the thermometer. Doing so may lead to breakage or injury Do not share the thermometer among individuals Do not attempt to disassemble or repair the thermometer. Doing so may result in inaccurate readings Do not attempt to burn the battery. It may burst Pay attention to polarity (+ –) when replacing the battery. Failure to do so may lead to fluid leakage, heat generation or bursting, resulting in damage to the unit Remove the battery when the thermometer is not used for three months or more. Failure to do so may lead to fluid leakage, heat generation or bursting, resulting in damage to the unit Do not attempt to disinfect the sensing section of the thermometer by immersing it in alcohol or hot water (water over 50C) | Frequently Asked Questions: | How to switch between Fahrenheit and Celcius units? Press the I/O button for 7 seconds until a beep is heard. The display will change to the other measurement scale at the time when the beep sounds. | How to check the last measured temperature? Press the I/O button to display the recently measured temperature. | Nothing appears in the display section when the power switch is pressed. What could be the error? There may be cases for this to happen. The battery may be inserted incorrectly. Take out the battery and replace it using the correct polarity The battery is depleted. Replace with a new battery, and the device should start working | How do you know if the thermometer is accurate? The ice bath test is the easiest way to test a thermometer for accuracy, assuming the thermometer will display temperatures of 32F or less. | How do you know if the thermometer is broken? Insert the thermometer into the glass of cold water without touching the sides of the glass. After 30 seconds, the thermometer should read 32 F. If it doesn't, it may need to be replaced or recalibrated. | What can affect a thermometer reading? Direct sunlight, cold temperatures or a sweaty forehead can affect temperature readings. Variations in user technique, such as holding the scanner too far away from the forehead, also may affect accuracy. | Note: Customer Care Id: [email protected] Customer Care Number: 18004190492